|
|
Instruments
Honeywell offers a variety of accessories to complement our instruments, including inline signature calibration modules, summing boxes, covers, panel, bench, and rack mounts, mating connectors, cable assemblies, software, replacement manuals, and upgrade kits.
If you don’t see exactly what you need listed below, or have special requirements for your particular application or operating environment, please contact Honeywell for assistance.
Features
- Signature calibration modules
- Summing boxes
- Covers
- Bench mount
- Panel mount
- Rack mount
- Mating connectors
- Cable assemblies
- Replacement manuals
- Software
- Upgrade kits
|
|
 Honeywell offers various cable assemblies for our instruments including cables and connectors for the GM family and molded 25 pin male/female cables for general connection use.
If you have special cable or connection needs not listed below, please contact Honeywell for assistance.
More Cable Assemblies Can't Find What You're Looking For? Let Us Help  Honeywell offers bench mount adapters and 1/8 DIN meter for Honeywell’s GM/DM instruments and 1/8 DIN (SC500), as well as, bench mount hand adapters for 3/8 DIN (SC2000).
If you have special bench mounting adapter needs not listed below, please contact Honeywell for assistance. More Bench Mount Can't Find What You're Looking For? Let Us Help  Honeywell offers replacement manuals and communication guides for the Model SC family of instruments.
If you need additional copies of manuals for other Honeywell products, check our technical resources section or contact Honeywell for assistance.
More Manual Can't Find What You're Looking For? Let Us Help
|
|
|
|
|
|
-
53
-
Model 53 Low Cost Load Cell, ±0.6% full scale accuracy, Range of 5 lb to 50,000 lb, Stainless Steel Diaphragm Design, Miniature footprint
-
more 53
-
-
1600
-
Model 1600 Series ( 1604 -1607 ) Rotary Transformer Torque Sensor, 50 lb-in to 100,000 lb-in, 0.1 % Non-linearity and Hysteresis, circular keyed shaft configuration
-
more 1600
-
-
SC500
-
Programmable single-channel instrument; 1/8 DIN case; Available in strain gage, high level, and LVDT input versions
-
more SC500
-
|
|
|
|
|
|
-
You must use quotation marks when searching order codes. Start with the base order code and range & then add option codes to further reduce the search.
For example: “AL111” will yield the most results. “AL111BN,1A,2U” will start to narrow the search
-
Use the * symbol at the end of a word, part number, partial part number or model number. This will create a wildcard search.
For example: Entering 366* will bring up Model 366 and Model 3663 as well as specific part numbers which contain 366 within the part number.
-
Enter AND (no quote marks) between search terms. This will locate the exact phrase which contains all of the words referenced.
For example: Entering Subminiature AND Load will bring up all products which have BOTH words in the product description.
-
Enter “OR” (with quote marks) between search terms to find products with either word in the description.
For Example: Entering Miniature “OR” Subminiature will bring up all products which have EITHER word in the product spelling
-
When searching by product family or category, try navigating through the product menu via the navigation button on the top left of the website. Or use the Find-A-Solution button from the home page.
|
|
|
|