|
Rotary Measurement System
Honeywell’s analogy telemetry rotary torque systems are often well suited for both short and long term testing and monitoring of torque or strain on rotating applications where other measurement methods are affected by vibration, dust, moisture, high RPMs, and large axial/radial shaft movements.
Utilizing an existing customer gage shaft assembly, these rotary torque systems take the strain data from a rotating bridge assembly and converts it to a high level output via wireless telemetry.
A combination of up to six transmitters and receivers operating on different frequencies will provide up to six points of measurement on the same shaft. Options to add additional points of measurement are also available by special order.
A scalable analog output and numeric display readout on the receiver provides an electrical and visual indication of the measurement. The receiver provides controls for gain and zero adjustments, display scaling, and IPS power setting.
Need more information or want to discuss a customized solution for your particular application? Contact Honeywell to learn more.
Features
- Wireless telemetry
- dc to 1000 HZ frequency response
- 1 to 6 channels of measurement
- Three analog outputs and optional isolated output channel
- 10 kHz sampling rate
- Custom machined collar assembly, stationary loop antenna, induced power supply pretested as a set at factory, enabling quick installation and setup
|
|
|
Viewing 1-5 of 8 items
|
|
The product has been added to your Shopping Cart Rotary Measurement System |  | | Model 2101 Rotary Measurement System, 1 Channel System, Induced Power, No Batteries Required, Wireless Telemetry. Optional 12 or 24 VDC supply versions are available. |  | | Model 2102-WDC Rotary Measurement System, 2 Channel System, Induced Power, No Batteries Required, Wireless Telemetry. Optional 12 or 24 VDC supply versions are available. |  | | Model 2103 Rotary Measurement System, 3 Channel System, Induced Power, No Batteries Required, Wireless Telemetry. Optional 12 or 24 VDC supply versions are available. |  | | Model 2104 Rotary Measurement System, 4 Channel System, Induced Power, No Batteries Required, Wireless Telemetry. Optional 12 or 24 VDC supply versions are available. |  | | Model 2105-WDC Rotary Measurement System, 5 Channel System, Induced Power, No Batteries Required, Wireless Telemetry. Optional 12 or 24 VDC supply versions are available. |
|
|
|
Viewing 1-5 of 8 items
|
|
|
-
53
-
Model 53 Low Cost Load Cell, ±0.6% full scale accuracy, Range of 5 lb to 50,000 lb, Stainless Steel Diaphragm Design, Miniature footprint
-
more 53
-
-
1600
-
Model 1600 Series ( 1604 -1607 ) Rotary Transformer Torque Sensor, 50 lb-in to 100,000 lb-in, 0.1 % Non-linearity and Hysteresis, circular keyed shaft configuration
-
more 1600
-
-
SC500
-
Programmable single-channel instrument; 1/8 DIN case; Available in strain gage, high level, and LVDT input versions
-
more SC500
-
|
|
|
|
|
-
You must use quotation marks when searching order codes. Start with the base order code and range & then add option codes to further reduce the search.
For example: “AL111” will yield the most results. “AL111BN,1A,2U” will start to narrow the search
-
Use the * symbol at the end of a word, part number, partial part number or model number. This will create a wildcard search.
For example: Entering 366* will bring up Model 366 and Model 3663 as well as specific part numbers which contain 366 within the part number.
-
Enter AND (no quote marks) between search terms. This will locate the exact phrase which contains all of the words referenced.
For example: Entering Subminiature AND Load will bring up all products which have BOTH words in the product description.
-
Enter “OR” (with quote marks) between search terms to find products with either word in the description.
For Example: Entering Miniature “OR” Subminiature will bring up all products which have EITHER word in the product spelling
-
When searching by product family or category, try navigating through the product menu via the navigation button on the top left of the website. Or use the Find-A-Solution button from the home page.
|
|
|
|